Oris Artelier 01 560 7604 4919-07 5 16 60FC

The Oris Artelier 01 560 7604 4919-07 5 16 60FC takes a 16 mm watch band.

Oris Artelier 01 560 7604 4919-07 5 16 60FC, 16 mm lug width

Oris · Artelier

Lug width
16 mm
Case diameter
31 mm
Reference
01 560 7604 4919-07 5 16 60FC
Family
Artelier
Case material
Acciaio
Model
Artelier Skeleton 31 Diamonds Stainless Steel - Diamond

Bands that fit

Cut and stitched in Milano, in the width this watch takes.

See every 16 mm band →

Will a strap close on your wrist?

Set for this watch: 31 mm of case and 16 mm between the lugs. Add your wrist and see where a standard strap would close.

mm

Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.

75 mm115 mm

Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.

Why ready-made straps come in one length →

Sizing notes

  • 16 mm is the gap between the lugs, so a 16 mm band goes in without adapters. Whether it sits flush against a 31 mm case depends on how that case is shaped.
  • Inside the Artelier family the lug width is not one number: it runs 14, 16, 17, 18, 20, 21, 22, 23, 24 mm. This reference is the 16 mm one, so a band bought for another Artelier may not fit it. Why the size changes inside a family →
  • 16 mm is not a common size: only 3,009 of the 41,485 watches measured take it (7.3%), so ready-made choice at this width is narrower than at 20 or 22 mm. Every watch that takes 16 mm →