Kobold Soarway KD 719121
The Kobold Soarway KD 719121 takes a 24 mm watch band.
Kobold · Soarway
- Lug width
- 24 mm
- Case diameter
- 46 mm
- Reference
- KD 719121
- Family
- Soarway
- Case material
- Acciaio
- Model
- Soarway GMT Stainless Steel / Blue
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Hammered calfskin strap in cuoio
Brown Saffiano Leather Strap
Hammered Calfskin Strap Light Blue
Light Brown Stingray Leather StrapWill a strap close on your wrist?
Set for this watch: 46 mm of case and 24 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 24 mm is the gap between the lugs, so a 24 mm band goes in without adapters. Whether it sits flush against a 46 mm case depends on how that case is shaped.
- Inside the Soarway family the lug width is not one number: it runs 18, 22, 24 mm. This reference is the 24 mm one, so a band bought for another Soarway may not fit it. Why the size changes inside a family →
- 24 mm is not a common size: only 2,192 of the 41,485 watches measured take it (5.3%), so ready-made choice at this width is narrower than at 20 or 22 mm. Every watch that takes 24 mm →
Other Soarway references
- Soarway Chronograph Red Gold / WhiteKD 030779
18 mm - Soarway 44 Stainless Steel / BlackKD 1142142
22 mm - Soarway Diver Seal Stainless Steel / BlackKD 1172142
22 mm - Soarway Diver Stainless Steel / BlackKD 212441
22 mm - Soarway Large Diver Stainless Steel / BlackKD 832121-C
24 mm - Soarway Diver Safari Stainless Steel / DLC / BlackKD212445
22 mm