Kobold Soarway KD 212441
The Kobold Soarway KD 212441 takes a 22 mm watch band.
Kobold · Soarway
- Lug width
- 22 mm
- Case diameter
- 44 mm
- Reference
- KD 212441
- Family
- Soarway
- Case material
- Acciaio
- Model
- Soarway Diver Stainless Steel / Black
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Grey Hammered Leather Strap with Ecru Stitching
Italian Leather Military Strap — Burgundy
Saffiano Taupe Strap
Black Calfskin NATO Strap
Black Saffiano Rubber StrapWill a strap close on your wrist?
Set for this watch: 44 mm of case and 22 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 22 mm is the gap between the lugs, so a 22 mm band goes in without adapters. Whether it sits flush against a 44 mm case depends on how that case is shaped.
- Inside the Soarway family the lug width is not one number: it runs 18, 22, 24 mm. This reference is the 22 mm one, so a band bought for another Soarway may not fit it. Why the size changes inside a family →
- 22 mm is one of the common sizes: 6,971 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 22 mm →
Other Soarway references
- Soarway Chronograph Red Gold / WhiteKD 030779
18 mm - Soarway 44 Stainless Steel / BlackKD 1142142
22 mm - Soarway Diver Seal Stainless Steel / BlackKD 1172142
22 mm - Soarway GMT Stainless Steel / BlueKD 719121
24 mm - Soarway Large Diver Stainless Steel / BlackKD 832121-C
24 mm - Soarway Diver Safari Stainless Steel / DLC / BlackKD212445
22 mm