Certina DS Jubilee C902.251.46.016.00
The Certina DS Jubilee C902.251.46.016.00 takes a 16 mm watch band.
Certina · DS Jubilee
- Lug width
- 16 mm
- Case diameter
- 32 mm
- Reference
- C902.251.46.016.00
- Family
- DS Jubilee
- Case material
- Madreperla | Oro giallo, Acciaio
- Water resistance
- 100 m
- Model
- DS Jubile Lady Quartz Stainless Steel - Yellow Gold / MOP
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Single Pass Strap Pink — Hammered Calf
Pink Saffiano Strap
Violet Nappa Italian Leather Strap
Red Hammered Calfskin Single Pass Watch StrapWill a strap close on your wrist?
Set for this watch: 32 mm of case and 16 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 16 mm is the gap between the lugs, so a 16 mm band goes in without adapters. Whether it sits flush against a 32 mm case depends on how that case is shaped.
- Inside the DS Jubilee family the lug width is not one number: it runs 16, 20 mm. This reference is the 16 mm one, so a band bought for another DS Jubilee may not fit it. Why the size changes inside a family →
- 16 mm is not a common size: only 3,009 of the 41,485 watches measured take it (7.3%), so ready-made choice at this width is narrower than at 20 or 22 mm. Every watch that takes 16 mm →
Other DS Jubilee references
- DS Jubile Lady Quartz Stainless Steel - Yellow Gold / MOP / BraceletC902.251.41.016.00
16 mm - DS Jubile Quartz Stainless Steel - Yellow Gold / White / BraceletC902.451.41.011.00
20 mm - DS Jubile Quartz Stainless Steel - Yellow Gold / WhiteC902.451.46.011.00
20 mm
