Certina DS-1 C006.414.16.051.00
The Certina DS-1 C006.414.16.051.00 takes a 20 mm watch band.

Certina · DS-1
- Lug width
- 20 mm
- Case diameter
- 43 mm
- Reference
- C006.414.16.051.00
- Family
- DS-1
- Case material
- Acciaio
- Model
- DS-1 Chronograph
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Will a strap close on your wrist?
Set for this watch: 43 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 43 mm case depends on how that case is shaped.
- Inside the DS-1 family the lug width is not one number: it runs 15, 18, 19, 20 mm. This reference is the 20 mm one, so a band bought for another DS-1 may not fit it. Why the size changes inside a family →
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →
Other DS-1 references
- DS-1 Day-Date Stainless Steel / Silver / BraceletC006.430.11.031.00
20 mm - DS 1 LadyC0062071103100
15 mm - DS 1 LadyC0062071105100
15 mm - DS 1 LadyC0062071603100
18 mm - DS 1 LadyC0062071605100
20 mm - DS 1 LadyC0062072203100
15 mm
Vintage Black Calfskin Leather Strap
Hammered Calfskin Taupe Strap Ecru Stitching
Vintage Gray Calfskin Strap
Black Saffiano Rubber Strap
Grand Cavalier Military Brown Leather Strap




