Bell & Ross Vintage BRG123BLSTSST
The Bell & Ross Vintage BRG123BLSTSST takes a 20 mm watch band.
Bell & Ross · Vintage
- Lug width
- 20 mm
- Case diameter
- 41 mm
- Reference
- BRG123BLSTSST
- Family
- Vintage
- Case material
- Acciaio
- Model
- BR 123 Officer Black
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Hammered Pink Strap with Ecru Stitching
Natural Calfskin Rally Strap
Vintage Gray Calfskin Strap
Red Suede Strap with Stitching — Milano Straps
Black Calfskin NATO StrapWill a strap close on your wrist?
Set for this watch: 41 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 41 mm case depends on how that case is shaped.
- Inside the Vintage family the lug width is not one number: it runs 18, 20, 22 mm. This reference is the 20 mm one, so a band bought for another Vintage may not fit it. Why the size changes inside a family →
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →
Other Vintage references
- BR 123 Officer BlackBRG123BLSTSCR
20 mm - BR 123 Officer SilverBRG123WHSTSCR
20 mm - BR 123 Officer SilverBRG123WHSTSST
20 mm - BR 126 Original Brown ChronographBRG126-BRN-ST/SCR
22 mm - BR 126 Officer Silver ChronographBRG126-WH-ST/SCR
20 mm - BR 126 Officer Black ChronographBRG126BLSTSCR
20 mm
