Bell & Ross BR-01 BR0194RED
The Bell & Ross BR-01 BR0194RED takes a 20 mm watch band.
Bell & Ross · BR-01
- Lug width
- 20 mm
- Case diameter
- 46 mm
- Reference
- BR0194RED
- Family
- BR-01
- Case material
- Acciaio
- Model
- BR 01 94 Red Chronograph
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Hammered Pink Strap with Ecru Stitching
Natural Calfskin Rally Strap
Vintage Gray Calfskin Strap
Red Suede Strap with Stitching — Milano Straps
Black Calfskin NATO StrapWill a strap close on your wrist?
Set for this watch: 46 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 46 mm case depends on how that case is shaped.
- Inside the BR-01 family the lug width is not one number: it runs 20, 24 mm. This reference is the 20 mm one, so a band bought for another BR-01 may not fit it. Why the size changes inside a family →
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →
Other BR-01 references
- BR 01 Instrument de MarineBR01-CM-203
24 mm - BR-01 Laughing SkullBR01-SKULL-SK-FLD
24 mm - BR-01 Laughing SkullBR01-SKULL-SK-ST
24 mm - BR 01 Air SkullBR0192-AIR-SKULL
24 mm - BR 01 92 Pink Gold & CarbonBR0192-BICOLOR
24 mm - BR 01 92 CarbonBR0192-BL-CA
24 mm
