Bell & Ross BR-01 BR01-SKULL-SK-FLD

The Bell & Ross BR-01 BR01-SKULL-SK-FLD takes a 24 mm watch band.

Bell & Ross · BR-01

24mm

lug width

Shop 24 mm bands

Every watch that takes 24 mm →

Lug width: 24 mm
Case diameter: 46 mm
Reference: BR01-SKULL-SK-FLD
Family: BR-01
Case material: Acciaio
Model: BR-01 Laughing Skull
Year: 2018/3

Bands that fit

Cut and stitched in Milano, in the width this watch takes.

Natural Calfskin Rally Strap€110

Vintage Gray Calfskin Strap€80

Hammered Calfskin Strap Light Blue€98

Red Stingray Leather Strap€150

Black Stingray Leather Strap€150

See every 24 mm band →

Will a strap close on your wrist?

Set for this watch: 46 mm of case and 24 mm between the lugs. Add your wrist and see where a standard strap would close.

Your wrist

Watch length, lug to lug

Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.

Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.

Why ready-made straps come in one length →

Sizing notes

24 mm is the gap between the lugs, so a 24 mm band goes in without adapters. Whether it sits flush against a 46 mm case depends on how that case is shaped.
Inside the BR-01 family the lug width is not one number: it runs 20, 24 mm. This reference is the 24 mm one, so a band bought for another BR-01 may not fit it. Why the size changes inside a family →
24 mm is not a common size: only 2,192 of the 41,485 watches measured take it (5.3%), so ready-made choice at this width is narrower than at 20 or 22 mm. Every watch that takes 24 mm →