Baume & Mercier Hampton 10023
The Baume & Mercier Hampton 10023 takes an 18 mm watch band.
Baume & Mercier · Hampton
- Lug width
- 18 mm
- Case diameter
- 28 mm
- Reference
- 10023
- Family
- Hampton
- Case material
- Acciaio
- Model
- Hampton Lady Silver / Vertical Diamonds
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Natural Calfskin Rally Strap
Hammered Calfskin Strap Light Blue
Black Calfskin Rally Watch Strap – Handmade in Milan
Military Green Single Pass Strap — Hammered Calf
Matte Black Alligator Strap — Minimal StitchingWill a strap close on your wrist?
Set for this watch: 28 mm of case and 18 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 18 mm is the gap between the lugs, so a 18 mm band goes in without adapters. Whether it sits flush against a 28 mm case depends on how that case is shaped.
- Inside the Hampton family the lug width is not one number: it runs 18, 21 mm. This reference is the 18 mm one, so a band bought for another Hampton may not fit it. Why the size changes inside a family →
- 18 mm is not a common size: only 3,965 of the 41,485 watches measured take it (9.6%), so ready-made choice at this width is narrower than at 20 or 22 mm. Every watch that takes 18 mm →
Other Hampton references
- Hampton Lady10018
18 mm - Hampton Lady Black10019
18 mm - Hampton Lady Silver / Bracelet10020
18 mm - Hampton Lady Black / Bracelet10021
18 mm - Hampton Lady Black / Vertical Diamonds10022
18 mm - Hampton Lady Black / Horizontal Diamonds10024
18 mm
