Baume & Mercier Hampton 10019
The Baume & Mercier Hampton 10019 takes an 18 mm watch band.
Baume & Mercier · Hampton
- Lug width
- 18 mm
- Case diameter
- 27 mm
- Reference
- 10019
- Family
- Hampton
- Case material
- Acciaio
- Model
- Hampton Lady Black
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Natural Calfskin Rally Strap
Hammered Calfskin Strap Light Blue
Black Calfskin Rally Watch Strap – Handmade in Milan
Military Green Single Pass Strap — Hammered Calf
Matte Black Alligator Strap — Minimal StitchingWill a strap close on your wrist?
Set for this watch: 27 mm of case and 18 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 18 mm is the gap between the lugs, so a 18 mm band goes in without adapters. Whether it sits flush against a 27 mm case depends on how that case is shaped.
- Inside the Hampton family the lug width is not one number: it runs 18, 21 mm. This reference is the 18 mm one, so a band bought for another Hampton may not fit it. Why the size changes inside a family →
- 18 mm is not a common size: only 3,965 of the 41,485 watches measured take it (9.6%), so ready-made choice at this width is narrower than at 20 or 22 mm. Every watch that takes 18 mm →
Other Hampton references
- Hampton Lady10018
18 mm - Hampton Lady Silver / Bracelet10020
18 mm - Hampton Lady Black / Bracelet10021
18 mm - Hampton Lady Black / Vertical Diamonds10022
18 mm - Hampton Lady Silver / Vertical Diamonds10023
18 mm - Hampton Lady Black / Horizontal Diamonds10024
18 mm
