A. Lange & Söhne Lange 1 111.025
The A. Lange & Söhne Lange 1 111.025 takes a 19 mm watch band.
A. Lange & Söhne · Lange 1
- Lug width
- 19 mm
- Case diameter
- 36 mm
- Reference
- 111.025
- Family
- Lange 1
- Case material
- Platino
- Water resistance
- 30 m
- Model
- Kleine Lange 1 Platinum / Silver
- Year
- 1998 - 1999
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Millennium Green Alligator Strap — Minimal Stitching
Millennium Green Alligator Strap
Matte Black Alligator Strap
Black and Blue Leather Driver Strap
Black and Red Driver StrapWill a strap close on your wrist?
Set for this watch: 36 mm of case and 19 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 19 mm is the gap between the lugs, so a 19 mm band goes in without adapters. Whether it sits flush against a 36 mm case depends on how that case is shaped.
- 19 mm is an odd size: most ready-made bands are made in even widths, so this reference needs one cut to measure or a band that runs in odd sizes. Why some watches take odd sizes →
- Inside the Lange 1 family the lug width is not one number: it runs 18, 19, 20, 22 mm. This reference is the 19 mm one, so a band bought for another Lange 1 may not fit it. Why the size changes inside a family →
- 19 mm is not a common size: only 1,919 of the 41,485 watches measured take it (4.6%), so ready-made choice at this width is narrower than at 20 or 22 mm. Every watch that takes 19 mm →
Other Lange 1 references
- Lange 1 Yellow Gold Painted101.002
20 mm - Lange 1 Platinum101.005
20 mm - Lange 1 Yellow Gold101.021
20 mm - Lange 1 Yellow Gold Painted101.022
20 mm - Lange 1 Platinum Stealth101.025
20 mm - Lange 1 Stainless Steel101.026
20 mm
