Zenith Chronomaster Original 03.3200.3600/69.M3200

The Zenith Chronomaster Original 03.3200.3600/69.M3200 takes a 19 mm watch band.

Zenith · Chronomaster Original

19mm

lug width

Shop 19 mm bands

Every watch that takes 19 mm →

Lug width: 19 mm
Case diameter: 38 mm
Reference: 03.3200.3600/69.M3200
Family: Chronomaster Original
Case material: Acciaio
Model: Chronomaster Original Stainless Steel / Silver / Bracelet
Year: 2021

Bands that fit

Cut and stitched in Milano, in the width this watch takes.

Matte Dark Gray Alligator Strap€195

Millennium Green Alligator Strap — Minimal Stitching€149

Matte Black Alligator Strap — Minimal Stitching€149

Hammered calfskin strap in cuoio€98

Vintage Olive Green Calf Leather Watch Strap€80

See every 19 mm band →

Will a strap close on your wrist?

Set for this watch: 38 mm of case and 19 mm between the lugs. Add your wrist and see where a standard strap would close.

Your wrist

Watch length, lug to lug

Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.

Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.

Why ready-made straps come in one length →

Sizing notes

19 mm is the gap between the lugs, so a 19 mm band goes in without adapters. Whether it sits flush against a 38 mm case depends on how that case is shaped.
19 mm is an odd size: most ready-made bands are made in even widths, so this reference needs one cut to measure or a band that runs in odd sizes. Why some watches take odd sizes →
Inside the Chronomaster Original family the lug width is not one number: it runs 19, 20 mm. This reference is the 19 mm one, so a band bought for another Chronomaster Original may not fit it. Why the size changes inside a family →
19 mm is not a common size: only 1,919 of the 41,485 watches measured take it (4.6%), so ready-made choice at this width is narrower than at 20 or 22 mm. Every watch that takes 19 mm →