Wyler Vetta Jumbostar WV0362
The Wyler Vetta Jumbostar WV0362 takes an 18 mm watch band.
Wyler Vetta · Jumbostar
- Lug width
- 18 mm
- Case diameter
- 36 mm
- Reference
- WV0362
- Family
- Jumbostar
- Case material
- 36mm Lug to lug: 45mm Distanza tra le anse: 18mm Spessore to
- Water resistance
- 5 ATM
- Model
- Jumbostar WV0362
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Hammered Calfskin Taupe Strap Ecru Stitching
Saffiano Black Strap Tone Stitching
Vintage Brown Calfskin Strap — Natural Patina
Red Hammered Calfskin Single Pass Watch Strap
Millennium Green Alligator StrapWill a strap close on your wrist?
Set for this watch: 36 mm of case and 18 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 18 mm is the gap between the lugs, so a 18 mm band goes in without adapters. Whether it sits flush against a 36 mm case depends on how that case is shaped.
- Inside the Jumbostar family the lug width is not one number: it runs 18, 20, 22 mm. This reference is the 18 mm one, so a band bought for another Jumbostar may not fit it. Why the size changes inside a family →
- 18 mm is not a common size: only 3,965 of the 41,485 watches measured take it (9.6%), so ready-made choice at this width is narrower than at 20 or 22 mm. Every watch that takes 18 mm →
