Steinhart Diver T0201
The Steinhart Diver T0201 takes a 22 mm watch band.
Steinhart · Diver
- Lug width
- 22 mm
- Case diameter
- 42 mm
- Reference
- T0201
- Family
- Diver
- Case material
- Acciaio
- Model
- GMT-Ocean 1 Black
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Black Saffiano Rubber Strap
Dark Brown Calfskin Military Strap
Vintage Black Calfskin Leather Strap
Hammered Pink Strap with Ecru Stitching
Vintage Olive Green Calf Leather Watch StrapWill a strap close on your wrist?
Set for this watch: 42 mm of case and 22 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 22 mm is the gap between the lugs, so a 22 mm band goes in without adapters. Whether it sits flush against a 42 mm case depends on how that case is shaped.
- Inside the Diver family the lug width is not one number: it runs 22, 24 mm. This reference is the 22 mm one, so a band bought for another Diver may not fit it. Why the size changes inside a family →
- 22 mm is one of the common sizes: 6,971 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 22 mm →
Other Diver references
- Ocean Two Premium BlackP0914
22 mm - Ocean One Premium BlueP0919
22 mm - Ocean Two Premium WhiteP0920
22 mm - Ocean Titanium 500 PremiumP0921
22 mm - GMT-Ocean 1 Black RedT0202
22 mm - Ocean One BlackT0204
22 mm
