Seiko Prospex Sky SSC349P1
The Seiko Prospex Sky SSC349P1 takes a 20 mm watch band.
Seiko · Prospex Sky
- Lug width
- 20 mm
- Case diameter
- 44 mm
- Reference
- SSC349P1
- Family
- Prospex Sky
- Case material
- Acciaio
- Model
- Prospex Sky SSC349P1 Stainless Steel / Black
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Hammered calfskin strap in cuoio
Single Pass Hammered Yellow Calfskin Strap
Hammered Calfskin Watch Strap Green with Ecru Stitching
Grand Cavalier Military Brown Leather Strap
Black Saffiano Rubber StrapWill a strap close on your wrist?
Set for this watch: 44 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 44 mm case depends on how that case is shaped.
- Inside the Prospex Sky family the lug width is not one number: it runs 20, 22, 24 mm. This reference is the 20 mm one, so a band bought for another Prospex Sky may not fit it. Why the size changes inside a family →
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →
Other Prospex Sky references
- Prospex Sky SRPB57K1 Stainless Steel / BlackSRPB57K1
22 mm - Prospex Sky SRPB59K1 Stainless Steel / CreamSRPB59K1
22 mm - Prospex Sky SRPB61K1 Stainless Steel / BlackSRPB61K1
22 mm - Prospex Sky SSC261P1 Stainless Steel / BlackSSC261P1
24 mm - Prospex Sky SSC347P1 Stainless Steel / BlueSSC347P1
20 mm - Prospex Sky SSC351P1 Stainless Steel / BlackSSC351P1
20 mm
