Seiko Mechanical SKX007K1
The Seiko Mechanical SKX007K1 takes a 22 mm watch band.
Seiko · Mechanical
- Lug width
- 22 mm
- Case diameter
- 42 mm
- Reference
- SKX007K1
- Family
- Mechanical
- Case material
- Acciaio
- Model
- SKX007 Black / Stainless Steel / Rubber
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Grey Hammered Leather Strap with Ecru Stitching
Vintage Olive Green Calf Leather Watch Strap
Saffiano Cognac Strap
Black Saffiano Rubber Strap
Black Calfskin NATO StrapWill a strap close on your wrist?
Set for this watch: 42 mm of case and 22 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 22 mm is the gap between the lugs, so a 22 mm band goes in without adapters. Whether it sits flush against a 42 mm case depends on how that case is shaped.
- Inside the Mechanical family the lug width is not one number: it runs 20, 22 mm. This reference is the 22 mm one, so a band bought for another Mechanical may not fit it. Why the size changes inside a family →
- 22 mm is one of the common sizes: 6,971 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 22 mm →
Other Mechanical references
- Mechanical Alpinist Stainless Steel / Green / StrapSARB017
20 mm - Mechanical Stainless Steel / Black / BraceletSARB033
20 mm - Mechanical Stainless Steel / Silver / BraceletSARB035
20 mm - Cocktail Time Ishigaki Shinobu Stainless Steel / Ice Blue / Strap / CoolSARB065
20 mm - Mechanical SKX007K1SKX007K1
22 mm - Mechanical SKX007K2SKX007K2
22 mm
