Rolex Oysterdate Precision 6466
The Rolex Oysterdate Precision 6466 takes a 17 mm watch band.
Rolex · Oysterdate Precision
- Lug width
- 17 mm
- Case diameter
- 30 mm
- Reference
- 6466
- Family
- Oysterdate Precision
- Case material
- Acciaio
- Model
- Oysterdate Midsize 6466 (30mm)
- Year
- 1950s-60s
Will a strap close on your wrist?
Set for this watch: 30 mm of case and 17 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 17 mm is the gap between the lugs, so a 17 mm band goes in without adapters. Whether it sits flush against a 30 mm case depends on how that case is shaped.
- This reference has drilled lugs: the spring bars are accessible from the outside, which makes band changes easier and safer on the case.
- 17 mm is an odd size: most ready-made bands are made in even widths, so this reference needs one cut to measure or a band that runs in odd sizes. Why some watches take odd sizes →
- Inside the Oysterdate Precision family the lug width is not one number: it runs 17, 18, 19 mm. This reference is the 17 mm one, so a band bought for another Oysterdate Precision may not fit it. Why the size changes inside a family →
- 17 mm is not a common size: only 569 of the 41,485 watches measured take it (1.4%), so ready-made choice at this width is narrower than at 20 or 22 mm. Every watch that takes 17 mm →
