Rolex Daytona 116500LN
The Rolex Daytona 116500LN takes a 20 mm watch band.
Rolex · Daytona
- Lug width
- 20 mm
- Case diameter
- 40 mm
- Reference
- 116500LN
- Family
- Daytona
- Case material
- Ceramic, Stainless Steel
- Model
- Daytona 116500LN
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Matte Dark Gray Alligator Strap
Black Alligator Strap with Light Red Edging
Vintage Alligator Strap Cognac
Hammered Pink Strap with Ecru Stitching
Vintage Brown Calfskin Strap — Natural PatinaWill a strap close on your wrist?
Set for this watch: 40 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 40 mm case depends on how that case is shaped.
- Inside the Daytona family the lug width is not one number: it runs 19, 20 mm. This reference is the 20 mm one, so a band bought for another Daytona may not fit it. Why the size changes inside a family →
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →
Other Daytona references
- Cosmograph Daytona Steel / Cerachrom / White116500LN-0001
20 mm - Cosmograph Daytona Steel / Cerachrom / Black116500LN-0002
20 mm - Daytona 116503116503
20 mm - Cosmograph Daytona Stainless Steel / Yellow Gold / White116503-0001
20 mm - Cosmograph Daytona Stainless Steel / Yellow Gold / Champagne116503-0003
20 mm - Cosmograph Daytona Stainless Steel / Yellow Gold / Black116503-0004
20 mm
