Patek Philippe Gondolo 4972/1G-001
The Patek Philippe Gondolo 4972/1G-001 takes a 20 mm watch band.
Patek Philippe · Gondolo
- Lug width
- 20 mm
- Case diameter
- 27 mm
- Reference
- 4972/1G-001
- Family
- Gondolo
- Case material
- Oro bianco
- Model
- Gondolo Serata 4972 White Gold / Mother of Pearl / Bracelet
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Matte Black Alligator Strap
Millennium Green Alligator Strap — Minimal Stitching
Matte Black Alligator Strap — Minimal Stitching
Horween Cordovan Brown Watch Strap
Green Cordovan StrapWill a strap close on your wrist?
Set for this watch: 27 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 27 mm case depends on how that case is shaped.
- Inside the Gondolo family the lug width is not one number: it runs 16, 17, 18, 20 mm. This reference is the 20 mm one, so a band bought for another Gondolo may not fit it. Why the size changes inside a family →
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →
Other Gondolo references
- Gondolo Serata Rose Gold - Spessartite / Brown Floral4962/200R-001
integrated - Gondolo Serata 4972 White Gold / Mother of Pearl4972G-001
18 mm - Gondolo Serata 4973 White Gold / Mother of Pearl4973G-001
18 mm - Gondolo 50985098P-001
17 mm - Gondolo 5098R5098R-001
- Gondolo 5101G5101G-001
integrated
