Patek Philippe Calatrava 3718A Slate

The Patek Philippe Calatrava 3718A Slate takes an 18 mm watch band.

Patek Philippe Calatrava 3718A Slate, 18 mm lug width

Patek Philippe · Calatrava

Lug width
18 mm
Case diameter
33 mm
Reference
3718A Slate
Family
Calatrava
Case material
Acciaio
Model
Calatrava 3718 150th Anniversary Japanese Market Slate
Year
1989 - 1989

Will a strap close on your wrist?

Set for this watch: 33 mm of case and 18 mm between the lugs. Add your wrist and see where a standard strap would close.

mm

Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.

75 mm115 mm

Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.

Why ready-made straps come in one length →

Sizing notes

  • 18 mm is the gap between the lugs, so a 18 mm band goes in without adapters. Whether it sits flush against a 33 mm case depends on how that case is shaped.
  • Inside the Calatrava family the lug width is not one number: it runs 14, 16, 17, 18, 19, 20, 21, 22 mm. This reference is the 18 mm one, so a band bought for another Calatrava may not fit it. Why the size changes inside a family →
  • 18 mm is not a common size: only 3,965 of the 41,485 watches measured take it (9.6%), so ready-made choice at this width is narrower than at 20 or 22 mm. Every watch that takes 18 mm →