Parmigiani Fleurier Toric PFH4371000100HA1441
The Parmigiani Fleurier Toric PFH4371000100HA1441 takes a 20 mm watch band.
Parmigiani Fleurier · Toric
- Lug width
- 20 mm
- Case diameter
- 46 mm
- Reference
- PFH4371000100HA1441
- Family
- Toric
- Case material
- Oro rosa
- Model
- Toric Quaestor Licorne
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Hammered calfskin strap in cuoio
Grey Hammered Leather Strap with Ecru Stitching
Italian Leather Military Strap — Burgundy
Black Calfskin NATO Strap
Black Saffiano Rubber StrapWill a strap close on your wrist?
Set for this watch: 46 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 46 mm case depends on how that case is shaped.
- Inside the Toric family the lug width is not one number: it runs 18, 20 mm. This reference is the 20 mm one, so a band bought for another Toric may not fit it. Why the size changes inside a family →
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →
Other Toric references
- Toric Quaestor PhoenixPFH4371202700HA1441
20 mm - Toric Quaestor PegasePFH4372001400HA1441
18 mm - Toric Quaestor LabyrinthePFH4392004100HA1441
18 mm
