Parmigiani Fleurier Tonda PFC267-1000300-HA1441
The Parmigiani Fleurier Tonda PFC267-1000300-HA1441 takes a 20 mm watch band.
Parmigiani Fleurier · Tonda
- Lug width
- 20 mm
- Case diameter
- 39 mm
- Reference
- PFC267-1000300-HA1441
- Family
- Tonda
- Case material
- Oro rosa
- Model
- Tonda 1950 Rose Gold / Graphite / Alligator
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Hammered calfskin strap in cuoio
Grey Hammered Leather Strap with Ecru Stitching
Italian Leather Military Strap — Burgundy
Black Calfskin NATO Strap
Black Saffiano Rubber StrapWill a strap close on your wrist?
Set for this watch: 39 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 39 mm case depends on how that case is shaped.
- Inside the Tonda family the lug width is not one number: it runs 18, 20 mm. This reference is the 20 mm one, so a band bought for another Tonda may not fit it. Why the size changes inside a family →
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →
Other Tonda references
- Tonda Centum White Gold / GraphiteFH227-1200300-HA1441
20 mm - Tonda 39 Qualite Fleurier White GoldPFC222-1200100-HA3141
18 mm - Tonda 39 Qualite Fleurier Red GoldPFC222-1602400-HA1431
18 mm - Tonda 39 Qualite Fleurier 10 AnsPFC222-1690600-HA3141
18 mm - Tonda Hemispheres Stainless Steel / BlackPFC231-0001400-HA4042
20 mm - Tonda Hemispheres Stainless Steel / BluePFC231-0001800-HA1442
18 mm
