Omega Seamaster Diver 300M 210.22.44.51.03.001

The Omega Seamaster Diver 300M 210.22.44.51.03.001 takes a 21 mm watch band.

Omega Seamaster Diver 300M 210.22.44.51.03.001, 21 mm lug width

Omega · Seamaster Diver 300M

Lug width
21 mm
Case diameter
44 mm
Reference
210.22.44.51.03.001
Family
Seamaster Diver 300M
Case material
Ceramica | Oro giallo, Acciaio
Water resistance
300 m
Model
Seamaster Diver 300M Master Co-Axial 44 Chronograph Stainless Steel / Yellow Gold / Blue / Rubber
Year
2019

Will a strap close on your wrist?

Set for this watch: 44 mm of case and 21 mm between the lugs. Add your wrist and see where a standard strap would close.

mm

Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.

75 mm115 mm

Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.

Why ready-made straps come in one length →

Sizing notes

  • 21 mm is the gap between the lugs, so a 21 mm band goes in without adapters. Whether it sits flush against a 44 mm case depends on how that case is shaped.
  • 21 mm is an odd size: most ready-made bands are made in even widths, so this reference needs one cut to measure or a band that runs in odd sizes. Why some watches take odd sizes →
  • Inside the Seamaster Diver 300M family the lug width is not one number: it runs 18, 20, 21, 22 mm. This reference is the 21 mm one, so a band bought for another Seamaster Diver 300M may not fit it. Why the size changes inside a family →
  • 21 mm is not a common size: only 2,956 of the 41,485 watches measured take it (7.1%), so ready-made choice at this width is narrower than at 20 or 22 mm. Every watch that takes 21 mm →