Nivada Grenchen Chronoking CHRONOKING-MECAQUARTZ-1

The Nivada Grenchen Chronoking CHRONOKING-MECAQUARTZ-1 takes a 16 mm watch band.

Nivada Grenchen · Chronoking

16mm

lug width

Shop 16 mm bands

Every watch that takes 16 mm →

Lug width: 16 mm
Case diameter: 38 mm
Reference: CHRONOKING-MECAQUARTZ-1
Family: Chronoking
Water resistance: 100
Model: Chronoking CHRONOKING-MECAQUARTZ-1

Bands that fit

Cut and stitched in Milano, in the width this watch takes.

Italian Leather White Nappa Strap€80

Violet Nappa Italian Leather Strap€80

Pink Nappa Italian Leather Strap€80

Red Hammered Calfskin Single Pass Watch Strap€80

See every 16 mm band →

Will a strap close on your wrist?

Set for this watch: 38 mm of case and 16 mm between the lugs. Add your wrist and see where a standard strap would close.

Your wrist

Watch length, lug to lug

Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.

Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.

Why ready-made straps come in one length →

Sizing notes

16 mm is the gap between the lugs, so a 16 mm band goes in without adapters. Whether it sits flush against a 38 mm case depends on how that case is shaped.
Inside the Chronoking family the lug width is not one number: it runs 16, 20 mm. This reference is the 16 mm one, so a band bought for another Chronoking may not fit it. Why the size changes inside a family →
16 mm is not a common size: only 3,009 of the 41,485 watches measured take it (7.3%), so ready-made choice at this width is narrower than at 20 or 22 mm. Every watch that takes 16 mm →