Mühle Glashütte Terranaut M1-40-14/1-MB
The Mühle Glashütte Terranaut M1-40-14/1-MB takes a 20 mm watch band.
Mühle Glashütte · Terranaut
- Lug width
- 20 mm
- Case diameter
- 40 mm
- Reference
- M1-40-14/1-MB
- Family
- Terranaut
- Case material
- Acciaio
- Model
- Terranaut III Trail Black / Bracelet
- Year
- 2011
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Black Barenia Strap 20mm
Vintage Black Calfskin Leather Strap
Cognac Mohawk Leather Strap
Black Saffiano Rubber Strap
Black Calfskin NATO StrapWill a strap close on your wrist?
Set for this watch: 40 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 40 mm case depends on how that case is shaped.
- Inside the Terranaut family the lug width is not one number: it runs 20, 22 mm. This reference is the 20 mm one, so a band bought for another Terranaut may not fit it. Why the size changes inside a family →
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →
Other Terranaut references
- Terranaut III Trail Black / StrapM1-40-14/1-NB
20 mm - Terranaut II Trail Black / BraceletM1-40-34/1-MB
22 mm - Terranaut II Trail Black / StrapM1-40-34/1-NB
22 mm - Terranaut I Trail Black / BraceletM1-40-53-MB
22 mm - Terranaut I Trail Black / StrapM1-40-53-NB
22 mm
