Mühle Glashütte ProMare M1-42-25-MB
The Mühle Glashütte ProMare M1-42-25-MB takes a 20 mm watch band.
Mühle Glashütte · ProMare
- Lug width
- 20 mm
- Case diameter
- 39 mm
- Reference
- M1-42-25-MB
- Family
- ProMare
- Case material
- Madreperla | Ceramica, Acciaio
- Model
- Promare Lady Mother of Pearl / Bracelet
- Year
- 2016
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Black Barenia Strap 20mm
Vintage Black Calfskin Leather Strap
Cognac Mohawk Leather Strap
Black Saffiano Rubber Strap
Black Calfskin NATO StrapWill a strap close on your wrist?
Set for this watch: 39 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 39 mm case depends on how that case is shaped.
- Inside the ProMare family the lug width is not one number: it runs 20, 22 mm. This reference is the 20 mm one, so a band bought for another ProMare may not fit it. Why the size changes inside a family →
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →
Other ProMare references
- ProMare Chronograph Carbon / BraceletM1-42-04-MB
22 mm - ProMare Chronograph Carbon / StrapM1-42-04-NB
22 mm - Promare Datum Black / BraceletM1-42-13-MB
22 mm - Promare Datum Black / StrapM1-42-13-NB
22 mm - Promare Lady Mother of Pearl / StrapM1-42-25-NB
20 mm - Promare Lady Mother of Pearl / StrapM1-42-25-SB
20 mm
