Montblanc 4810 Collection 114853
The Montblanc 4810 Collection 114853 takes a 20 mm watch band.
Montblanc · 4810 Collection
- Lug width
- 20 mm
- Case diameter
- 41 mm
- Reference
- 114853
- Family
- 4810 Collection
- Case material
- Acciaio
- Model
- 4810 Day-Date Stainless Steel / Silver / Alligator
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Embossed Red Epsom Strap
Natural Calfskin Rally Strap
Hammered Calfskin Strap Light Blue
Black Saffiano Rubber Strap
Military Green Canvas & Brown Leather StrapWill a strap close on your wrist?
Set for this watch: 41 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 41 mm case depends on how that case is shaped.
- Inside the 4810 Collection family the lug width is not one number: it runs 20, 22 mm. This reference is the 20 mm one, so a band bought for another 4810 Collection may not fit it. Why the size changes inside a family →
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →
Other 4810 Collection references
- 4810 Date Automatic Stainless Steel / Silver / Alligator114841
20 mm - 4810 Chronograph Stainless Steel / Silver / Bracelet114856
22 mm - 4810 Orbis Terrarum115071
20 mm - 4810 Orbis Terrarum Great Britain117186
20 mm
