watchbands.ai

Mido Baroncelli M027.207.11.010.00

The Mido Baroncelli M027.207.11.010.00 takes a 17 mm watch band.

Mido Baroncelli M027.207.11.010.00, 17 mm lug width

Mido · Baroncelli

17mm

lug width

Have one made

Every watch that takes 17 mm →

Lug width
17 mm
Case diameter
33 mm
Reference
M027.207.11.010.00
Family
Baroncelli
Case material
Acciaio
Model
Baroncelli Heritage Lady Stainless Steel / White / Bracelet

Will a strap close on your wrist?

Set for this watch: 33 mm of case and 17 mm between the lugs. Add your wrist and see where a standard strap would close.

mm

Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.

75 mm115 mm

Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.

Why ready-made straps come in one length →

Sizing notes

  • 17 mm is the gap between the lugs, so a 17 mm band goes in without adapters. Whether it sits flush against a 33 mm case depends on how that case is shaped.
  • 17 mm is an odd size: most ready-made bands are made in even widths, so this reference needs one cut to measure or a band that runs in odd sizes. Why some watches take odd sizes →
  • Inside the Baroncelli family the lug width is not one number: it runs 10, 12, 15, 16, 17, 18, 20, 22 mm. This reference is the 17 mm one, so a band bought for another Baroncelli may not fit it. Why the size changes inside a family →
  • 17 mm is not a common size: only 569 of the 41,485 watches measured take it (1.4%), so ready-made choice at this width is narrower than at 20 or 22 mm. Every watch that takes 17 mm →

Made to measure

A band cut for this watchCasati Milano makes one-of-a-kind bands to your watch and wrist, by appointment in Milano.casatimilano.com →

Other Baroncelli references

Same lug width, other Mido lines