Longines 1832 L4.325.4.92.2

The Longines 1832 L4.325.4.92.2 takes a 15 mm watch band.

Longines · 1832

15mm

lug width

Shop 15 mm bands

Every watch that takes 15 mm →

Lug width: 15 mm
Case diameter: 30 mm
Reference: L4.325.4.92.2
Family: 1832
Case material: Acciaio
Model: 1832 Automatic 30 Stainless Steel / Beige
Year: 2020

Will a strap close on your wrist?

Set for this watch: 30 mm of case and 15 mm between the lugs. Add your wrist and see where a standard strap would close.

Your wrist

Watch length, lug to lug

Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.

Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.

Why ready-made straps come in one length →

Sizing notes

15 mm is the gap between the lugs, so a 15 mm band goes in without adapters. Whether it sits flush against a 30 mm case depends on how that case is shaped.
15 mm is an odd size: most ready-made bands are made in even widths, so this reference needs one cut to measure or a band that runs in odd sizes. Why some watches take odd sizes →
Inside the 1832 family the lug width is not one number: it runs 15, 20, 21 mm. This reference is the 15 mm one, so a band bought for another 1832 may not fit it. Why the size changes inside a family →
15 mm is not a common size: only 469 of the 39,834 watches measured take it (1.2%), so ready-made choice at this width is narrower than at 20 or 22 mm. Every watch that takes 15 mm →