Jaeger-LeCoultre Reverso 3288560

The Jaeger-LeCoultre Reverso 3288560 takes a 14 mm watch band.

Jaeger-LeCoultre · Reverso

14mm

lug width

Have one made

Every watch that takes 14 mm →

Lug width: 14 mm
Case diameter: 20 mm
Reference: 3288560
Family: Reverso
Case material: Acciaio
Water resistance: 30 m
Model: Reverso One Monoface Stainless Steel / Diamond / Red / Alligator
Year: 2020

Bands that fit

Cut and stitched in Milano, in the width this watch takes.

Single Pass Hammered Yellow Calfskin Strap€80

Single Pass Strap Pink — Hammered Calf€80

Military Green Single Pass Strap — Hammered Calf€80

Will a strap close on your wrist?

Set for this watch: 20 mm of case and 14 mm between the lugs. Add your wrist and see where a standard strap would close.

Your wrist

Watch length, lug to lug

Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.

Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.

Why ready-made straps come in one length →

Sizing notes

14 mm is the gap between the lugs, so a 14 mm band goes in without adapters. Whether it sits flush against a 20 mm case depends on how that case is shaped.
Inside the Reverso family the lug width is not one number: it runs 14, 15, 16, 18, 19, 20, 22 mm. This reference is the 14 mm one, so a band bought for another Reverso may not fit it. Why the size changes inside a family →
14 mm is not a common size: only 1,419 of the 41,485 watches measured take it (3.4%), so ready-made choice at this width is narrower than at 20 or 22 mm. Every watch that takes 14 mm →