Grand Seiko Quartz SBGV231
The Grand Seiko Quartz SBGV231 takes a 20 mm watch band.
Grand Seiko · Quartz
- Lug width
- 20 mm
- Case diameter
- 40 mm
- Reference
- SBGV231
- Family
- Quartz
- Case material
- Titanio
- Model
- Quartz Titanium / Black / Bracelet
- Year
- 2017
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Hammered Calfskin Strap Light Blue
Hammered Calfskin Strap Light Blue
Hammered Black Calfskin Strap — Ecru Stitching
Red Suede Strap with Stitching — Milano Straps
Natural Calfskin NATO StrapWill a strap close on your wrist?
Set for this watch: 40 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 40 mm case depends on how that case is shaped.
- Inside the Quartz family the lug width is not one number: it runs 18, 19, 20 mm. This reference is the 20 mm one, so a band bought for another Quartz may not fit it. Why the size changes inside a family →
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →
Other Quartz references
- Quartz Day Date Stainless Steel / Silver / Caliber 9F 25th Anniversary Limited EditionSBGT241
19 mm - Quartz Titanium / Silver / BraceletSBGV229
20 mm - Quartz Titanium / Blue / BraceletSBGV233
20 mm - Quartz Date Stainless Steel / Blue / BraceletSBGV235
19 mm - Quartz Date Stainless Steel / Black / BraceletSBGV237
19 mm - Quartz Date Stainless Steel / Yellow Gold / Caliber 9F 25th Anniversary Limited EditionSBGV238
19 mm
