Grand Seiko Heritage SBGA469
The Grand Seiko Heritage SBGA469 takes a 20 mm watch band.
Grand Seiko · Heritage
- Lug width
- 20 mm
- Case diameter
- 41 mm
- Reference
- SBGA469
- Family
- Heritage
- Water resistance
- 100
- Model
- Heritage SBGA469
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Hammered Calfskin Strap Light Blue
Hammered Calfskin Strap Light Blue
Hammered Black Calfskin Strap — Ecru Stitching
Red Suede Strap with Stitching — Milano Straps
Natural Calfskin NATO StrapWill a strap close on your wrist?
Set for this watch: 41 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 41 mm case depends on how that case is shaped.
- Inside the Heritage family the lug width is not one number: it runs 14, 15, 18, 19, 20, 21 mm. This reference is the 20 mm one, so a band bought for another Heritage may not fit it. Why the size changes inside a family →
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →
Other Heritage references
- Heritage 30MM-STGK03130MM-STGK031
15 mm - Heritage 44GS-44GS44GS-44GS
18 mm - Heritage 45GS-SLGW00545GS-SLGW005
19 mm - Heritage SBGA373SBGA373
19 mm - Heritage SBGA375SBGA375
19 mm - Heritage SBGA413SBGA413
21 mm
