Girard-Perregaux 1966 49555-11-1A1-11A
The Girard-Perregaux 1966 49555-11-1A1-11A takes an 18 mm watch band.
Girard-Perregaux · 1966
- Lug width
- 18 mm
- Case diameter
- 40 mm
- Reference
- 49555-11-1A1-11A
- Family
- 1966
- Case material
- Acciaio
- Model
- 1966 40 Stainless Steel Bracelet
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Matte Black Alligator Strap
Matte Blue Alligator Strap
Matte Dark Brown Alligator Strap
Black and Red Driver Strap
Black and Blue Leather Driver StrapWill a strap close on your wrist?
Set for this watch: 40 mm of case and 18 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 18 mm is the gap between the lugs, so a 18 mm band goes in without adapters. Whether it sits flush against a 40 mm case depends on how that case is shaped.
- Inside the 1966 family the lug width is not one number: it runs 18, 20 mm. This reference is the 18 mm one, so a band bought for another 1966 may not fit it. Why the size changes inside a family →
- 18 mm is one of the common sizes: 4,244 of the 39,834 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 18 mm →
Other 1966 references
- 1966 36mm Stainless Steel / Silver / Bracelet49523-11-171-11A
20 mm - 1966 36mm Stainless Steel / Silver / Alligator49523-11-171-CB6A
20 mm - 1966 36mm Stainless Steel / Diamond / Silver / Bracelet49523D11A171-11A
- 1966 36mm Stainless Steel / Diamond / Silver / Alligator49523D11A171-CB6A
20 mm - 1966 36mm Stainless Steel / Diamond / Pink / Alligator49523D11A1837CKDB
20 mm - 1966 36mm Stainless Steel / Diamond / Taupe / Alligator49523D11A271-CKBA
