Eterna Heritage 1939.41.46.1298
The Eterna Heritage 1939.41.46.1298 takes a 20 mm watch band.
Eterna · Heritage
- Lug width
- 20 mm
- Case diameter
- 40 mm
- Reference
- 1939.41.46.1298
- Family
- Heritage
- Case material
- Acciaio
- Model
- Military Limited Edition 1939
- Year
- 2014
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Italian Leather Military Strap — Burgundy
Saffiano Taupe Strap
Embossed Azure Epsom Strap
Black Saffiano Rubber Strap
Red Hammered Calfskin Single Pass Watch StrapWill a strap close on your wrist?
Set for this watch: 40 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 40 mm case depends on how that case is shaped.
- Inside the Heritage family the lug width is not one number: it runs 18, 20 mm. This reference is the 20 mm one, so a band bought for another Heritage may not fit it. Why the size changes inside a family →
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →
Other Heritage references
- Chronograph Limited Edition 19381938.41.45.1250
20 mm - Military Limited Edition 1939 PVD1939.43.46.1299
20 mm - Pulsometer Limited Edition 19421942.41.64.1177
18 mm - Super Kontiki Limited Edition 19731973.41.41.1230
20 mm - Centenaire Date 40mm2960.69.11.1272
20 mm - Centenaire Date 32mm2961.69.11.1295
20 mm
