Dan Henry 1970 1970-44-Grey
The Dan Henry 1970 1970-44-Grey takes a 24 mm watch band.
Dan Henry · 1970
- Lug width
- 24 mm
- Case diameter
- 44 mm
- Reference
- 1970-44-Grey
- Family
- 1970
- Case material
- Acciaio
- Model
- 1970 Automatic Diver 44 Black-Grey / Stainless Steel
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Hammered calfskin strap in cuoio
Grey Hammered Leather Strap with Ecru Stitching
Brown Saffiano Leather Strap
Red Stingray Leather StrapWill a strap close on your wrist?
Set for this watch: 44 mm of case and 24 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 24 mm is the gap between the lugs, so a 24 mm band goes in without adapters. Whether it sits flush against a 44 mm case depends on how that case is shaped.
- Inside the 1970 family the lug width is not one number: it runs 22, 24 mm. This reference is the 24 mm one, so a band bought for another 1970 may not fit it. Why the size changes inside a family →
- 24 mm is not a common size: only 2,192 of the 41,485 watches measured take it (5.3%), so ready-made choice at this width is narrower than at 20 or 22 mm. Every watch that takes 24 mm →
