Bell & Ross Instruments BR05A-BLU-SKST/SST
The Bell & Ross Instruments BR05A-BLU-SKST/SST takes a 22 mm watch band.
Bell & Ross · Instruments
- Lug width
- 22 mm
- Case diameter
- 40 mm
- Reference
- BR05A-BLU-SKST/SST
- Family
- Instruments
- Case material
- Acciaio
- Model
- BR 05 Stainless Steel / Skeleton Blue / Bracelet
- Year
- 2020
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Vintage Black Calfskin Leather Strap
Hammered Calfskin Strap Light Blue
Hammered Black Calfskin Strap — Ecru Stitching
Grand Cavalier Military Brown Leather Strap
Black Saffiano Rubber StrapWill a strap close on your wrist?
Set for this watch: 40 mm of case and 22 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 22 mm is the gap between the lugs, so a 22 mm band goes in without adapters. Whether it sits flush against a 40 mm case depends on how that case is shaped.
- Inside the Instruments family the lug width is not one number: it runs 20, 22, 24 mm. This reference is the 22 mm one, so a band bought for another Instruments may not fit it. Why the size changes inside a family →
- 22 mm is one of the common sizes: 6,971 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 22 mm →
Other Instruments references
- BR-01 Tourbillon SkullBR01-TOURB-AIRBORN
24 mm - BR01-92 10th AnniversaryBR0192-10TH-CE
20 mm - BR 05 Rose Gold / Black / BraceletBR05A-BL-PG/SPG
integrated - BR 05 Rose Gold / Black / RubberBR05A-BL-PG/SRB
22 mm - BR 05 Stainless Steel / Black / RubberBR05A-BL-ST/SRB
integrated - BR 05 Stainless Steel / Black / BraceletBR05A-BL-ST/SST
integrated
