Ball Watch Engineer Hydrocarbon DC3026A-PC-BK

The Ball Watch Engineer Hydrocarbon DC3026A-PC-BK takes a 22 mm watch band.

Ball Watch · Engineer Hydrocarbon

22mm

lug width

Shop 22 mm bands

Every watch that takes 22 mm →

Lug width: 22 mm
Case diameter: 42 mm
Reference: DC3026A-PC-BK
Family: Engineer Hydrocarbon
Case material: Titanio
Model: Engineer Hydrocarbon NEDU Black / Rubber
Year: 2013

Bands that fit

Cut and stitched in Milano, in the width this watch takes.

Hammered Calfskin Taupe Strap Ecru Stitching€98

Hammered Calfskin Strap Light Blue€98

Brown Italian Leather Military Strap€80

Natural Calfskin NATO Strap€80

Black Saffiano Rubber Strap€105

See every 22 mm band →

Will a strap close on your wrist?

Set for this watch: 42 mm of case and 22 mm between the lugs. Add your wrist and see where a standard strap would close.

Your wrist

Watch length, lug to lug

Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.

Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.

Why ready-made straps come in one length →

Sizing notes

22 mm is the gap between the lugs, so a 22 mm band goes in without adapters. Whether it sits flush against a 42 mm case depends on how that case is shaped.
Inside the Engineer Hydrocarbon family the lug width is not one number: it runs 16, 21, 22 mm. This reference is the 22 mm one, so a band bought for another Engineer Hydrocarbon may not fit it. Why the size changes inside a family →
22 mm is one of the common sizes: 6,971 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 22 mm →