A. Lange & Söhne Tourbillon 701.001
The A. Lange & Söhne Tourbillon 701.001 takes a 20 mm watch band.
A. Lange & Söhne · Tourbillon
- Lug width
- 20 mm
- Case diameter
- 39 mm
- Reference
- 701.001
- Family
- Tourbillon
- Case material
- Oro giallo
- Water resistance
- 30 m
- Model
- Tourbillon Pour le Mérite
- Year
- 1994 - 1998
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Black Rubberized Alligator Strap with Blue Tribal Stitching
Black Alligator Strap with White Edges
Red Gummy Alligator Strap with Blue Tribal Stitching - 20mm
Horween Cordovan Brown Watch Strap
Green Cordovan StrapWill a strap close on your wrist?
Set for this watch: 39 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 39 mm case depends on how that case is shaped.
- Inside the Tourbillon family the lug width is not one number: it runs 19, 20 mm. This reference is the 20 mm one, so a band bought for another Tourbillon may not fit it. Why the size changes inside a family →
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →
Other Tourbillon references
- Tourbillon Pour le Mérite Platinum701.005
20 mm - Tourbillon Pour le Mérite White Gold Blue701.007
20 mm - Tourbillon Pour le Mérite Pink Gold / Black701.011
20 mm - Tourbillon Pour le Mérite White Gold / Black701.028
20 mm - Tourbograph Pour le Mérite Platinum / Silver702.025
20 mm - Tourbillon Pour le Mérite Platinum / Black711.035
19 mm
