Unimatic UT1-PD
The Unimatic UT1-PD takes a 22 mm watch band.
Unimatic · UT1-PD
- Lug width
- 22 mm
- Case diameter
- 40 mm
- Family
- UT1-PD
- Case material
- Acciaio inossidabile 316L sandblastato
- Water resistance
- 300
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Saffiano Black Strap Tone Stitching
Saffiano Dark Brown Tonal Strap
Embossed Red Epsom Strap
Brown Vintage Military Leather Strap
Black Saffiano Rubber StrapWill a strap close on your wrist?
Set for this watch: 40 mm of case and 22 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 22 mm is the gap between the lugs, so a 22 mm band goes in without adapters. Whether it sits flush against a 40 mm case depends on how that case is shaped.
- 22 mm is one of the common sizes: 6,971 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 22 mm →
