Rolex Oyster Perpetual 100th - 41mm 134303
The Rolex Oyster Perpetual 100th - 41mm 134303 takes a 21 mm watch band.
Rolex · Oyster Perpetual 100th - 41mm
- Lug width
- 21 mm
- Case diameter
- 41 mm
- Reference
- 134303
- Family
- Oyster Perpetual 100th - 41mm
- Case material
- acciaio case, oro giallo ghiera, crown
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Red Alligator Strap Water Resistant
Matte Dark Brown Alligator Strap
Matte Grey Alligator Strap
Hammered calfskin strap in cuoio
Grey Hammered Leather Strap with Ecru StitchingWill a strap close on your wrist?
Set for this watch: 41 mm of case and 21 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 21 mm is the gap between the lugs, so a 21 mm band goes in without adapters. Whether it sits flush against a 41 mm case depends on how that case is shaped.
- 21 mm is an odd size: most ready-made bands are made in even widths, so this reference needs one cut to measure or a band that runs in odd sizes. Why some watches take odd sizes →
- 21 mm is not a common size: only 2,956 of the 41,485 watches measured take it (7.1%), so ready-made choice at this width is narrower than at 20 or 22 mm. Every watch that takes 21 mm →
