Robot Watch Graphic 2202ST01
The Robot Watch Graphic 2202ST01 takes a 20 mm watch band.
Robot Watch · Graphic
- Lug width
- 20 mm
- Case diameter
- 42 mm
- Reference
- 2202ST01
- Family
- Graphic
- Case material
- Acciaio
- Model
- Graphic Analog Silver
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Hammered calfskin strap in cuoio
Hammered Calfskin Watch Strap Green with Ecru Stitching
Vintage Olive Green Calf Leather Watch Strap
Red Hammered Calfskin Single Pass Watch Strap
Black Saffiano Rubber StrapWill a strap close on your wrist?
Set for this watch: 42 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 42 mm case depends on how that case is shaped.
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →
