Ressence Type 3 Type 3S
The Ressence Type 3 Type 3S takes a 22 mm watch band.

Ressence · Type 3
- Lug width
- 22 mm
- Case diameter
- 44 mm
- Reference
- Type 3S
- Family
- Type 3
- Case material
- Titanio
- Model
- Type 3 Black Sandblasted
- Year
- 2013
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Will a strap close on your wrist?
Set for this watch: 44 mm of case and 22 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 22 mm is the gap between the lugs, so a 22 mm band goes in without adapters. Whether it sits flush against a 44 mm case depends on how that case is shaped.
- 22 mm is one of the common sizes: 6,971 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 22 mm →
Other Type 3 references
- Type 3 Type 3 EE EucalyptusType 3 EE Eucalyptus
22 mm - Type 3 Type 3 WhiteType 3 White
22 mm - Type 3 BlackType 3B
22 mm - Type 3 BlackType 3BB
22 mm - Type 3 Night BlueType 3N
22 mm
Vintage Black Calfskin Leather Strap
Hammered Calfskin Taupe Strap Ecru Stitching
Saffiano Black Strap Tone Stitching
Black Saffiano Rubber Strap
Dark Brown Calfskin Military Strap

