Ressence Type 1 Type 1N
The Ressence Type 1 Type 1N takes a 20 mm watch band.

Ressence · Type 1
- Lug width
- 20 mm
- Case diameter
- 42 mm
- Reference
- Type 1N
- Family
- Type 1
- Case material
- Titanio
- Model
- Type 1 Night Blue
- Year
- 2014
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Will a strap close on your wrist?
Set for this watch: 42 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 42 mm case depends on how that case is shaped.
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →
Other Type 1 references
- Type 1 Type 1 Round BlackType 1 Round Black
20 mm - Type 1 Type 1 Round MulticolourType 1 Round Multicolour
20 mm - Type 1 Type 1 Slim WhiteType 1 Slim White
20 mm - Type 1 Type 1 Squared BlackType 1 Squared Black
20 mm - Type 1 BlackType 1B
20 mm - Type 1 ChampagneType 1CH
20 mm
Saffiano Black Strap Tone Stitching
Dark Brown Saffiano Strap with Ecru Stitching
Embossed Red Epsom Strap
Black Saffiano Rubber Strap
Dark Brown Calfskin Military Strap


