Elka Watch Co. D-Series D01-0901
The Elka Watch Co. D-Series D01-0901 takes a 20 mm watch band.
Elka Watch Co. · D-Series
- Lug width
- 20 mm
- Case diameter
- 40.8 mm
- Reference
- D01-0901
- Family
- D-Series
- Case material
- Acciaio
- Model
- D-Series Stainless Steel / Grey / NATO
- Year
- 2023
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Vintage Black Calfskin Leather Strap
Hammered Calfskin Taupe Strap Ecru Stitching
Saffiano Black Strap Tone Stitching
Black Saffiano Rubber Strap
Brown Vintage Military Leather StrapWill a strap close on your wrist?
Set for this watch: 40.8 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 40.8 mm case depends on how that case is shaped.
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →
Other D-Series references
- D-Series Stainless Steel / Silver / LeatherD01-0804
20 mm - D-Series Stainless Steel / Silver / LeatherD01-0808
20 mm - D-Series Stainless Steel / Silver / MilaneseD01-1001
20 mm - D-Series Stainless Steel / Blue / LeatherD02-0805
20 mm - D-Series Stainless Steel / Blue / LeatherD02-0806
20 mm - D-Series Stainless Steel / Blue / NATOD02-0902
20 mm
