Arnold & Son Royal Collection 1CTAR.G01A.C112R
The Arnold & Son Royal Collection 1CTAR.G01A.C112R takes a 20 mm watch band.
Arnold & Son · Royal Collection
- Lug width
- 20 mm
- Case diameter
- 44 mm
- Reference
- 1CTAR.G01A.C112R
- Family
- Royal Collection
- Case material
- Oro rosso
- Model
- TEC1
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Vintage Black Calfskin Leather Strap
Saffiano Dark Brown Tonal Strap
Hammered Pink Strap with Ecru Stitching
Dark Brown Calfskin Military Strap
Black Saffiano Rubber StrapWill a strap close on your wrist?
Set for this watch: 44 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 44 mm case depends on how that case is shaped.
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →
Other Royal Collection references
- TEC11CTAG.S01A.C113G
20 mm - TEC11CTAG.U02A.C113G
20 mm - TEC11CTAR.U01A.C112R
20 mm - HM Perpetual Moon1GLAR.I01A.C122A
20 mm - HM Perpetual Moon1GLAR.U01A.C123A
20 mm - HM Perpetual Moon1GLAS.B01A.C122S
20 mm
