Apiar Carbon1.0 OG
The Apiar Carbon1.0 OG takes a 20 mm watch band.
Apiar · Carbon1.0 OG
- Lug width
- 20 mm
- Case diameter
- 40.5 mm
- Family
- Carbon1.0 OG
- Case material
- Composito carbonio-PEEK (cassa esterna, processo CBAM), Titanio Grade 23 Ti-6Al-4V ELI (cassa interna, processo L-PBF)
- Water resistance
- 50
Bands that fit
Cut and stitched in Milano, in the width this watch takes.
Hammered Black Calfskin Strap — Ecru Stitching
Brown Italian Leather Strap
Vintage Gray Calfskin Strap
Black Saffiano Strap Ecru Stitching
Vintage Brown Calfskin Strap — Natural Patina
Swift Topo Leather StrapWill a strap close on your wrist?
Set for this watch: 40.5 mm of case and 20 mm between the lugs. Add your wrist and see where a standard strap would close.
mm
Filled in with the case diameter, which is what we hold for this reference. Measure the watch tip to tip for the exact answer: it is usually a few mm more.
Enter your wrist measurement to see whether a standard 75/115 mm strap closes on you, and where.
Sizing notes
- 20 mm is the gap between the lugs, so a 20 mm band goes in without adapters. Whether it sits flush against a 40.5 mm case depends on how that case is shaped.
- 20 mm is one of the common sizes: 15,081 of the 41,485 watches measured take it, which is why it is the width most bands are cut in. Every watch that takes 20 mm →